Is there a 'standard' offset for F100 rims? I have found some 15x8 sunraysia rims for sale but the seller can't tell me what offset they are (I believe it needs to be around -25mm).
I want to fit 31x10.5 tyres to my WT Sierra (after the body lift) and the recommended rim for these tyres is between 7" and 9" so a 15x8 should be OK. However, reading Outerlimits, some were saying that 8" is too wide for a 10.5 (it will roll off the bead easier), then someone else will say 7" is too narrow. Who's right?
F100 rim offset
Moderator: Committee
- christover1
- Financial Member
- Posts: 3056
- Joined: Thu 09 Aug, 2007 5:18 pm
- Location: Croydon Victoria Australia
- Contact:
Re: F100 rim offset
I use f100 rims, but mine are offset modified to suit a narrow track.
They are 8" rims and I've never rolled a 31"tyre off them yet.
I think 7's would be better, too, but 8's seem easier to get, and then you have options to go bigger tyres one day if needed.
christover
They are 8" rims and I've never rolled a 31"tyre off them yet.
I think 7's would be better, too, but 8's seem easier to get, and then you have options to go bigger tyres one day if needed.
christover
ZOOKS RULE DA BUSH
Re: F100 rim offset
I used 15x8s with 31" silverstone extremes for a while and never had a problem except I did dint one rim a little on a rock...I could run them at 4-6psi with no problems.