F100 rim offset

Anything related to 4WDs and 4WDing

Moderator: Committee

Post Reply
steve125
Financial Member
Posts: 426
Joined: Thu 09 Apr, 2009 10:14 pm

F100 rim offset

Post by steve125 »

Is there a 'standard' offset for F100 rims? I have found some 15x8 sunraysia rims for sale but the seller can't tell me what offset they are (I believe it needs to be around -25mm).

I want to fit 31x10.5 tyres to my WT Sierra (after the body lift) and the recommended rim for these tyres is between 7" and 9" so a 15x8 should be OK. However, reading Outerlimits, some were saying that 8" is too wide for a 10.5 (it will roll off the bead easier), then someone else will say 7" is too narrow. Who's right?
User avatar
christover1
Financial Member
Posts: 3046
Joined: Thu 09 Aug, 2007 5:18 pm
Location: Croydon Victoria Australia
Contact:

Re: F100 rim offset

Post by christover1 »

I use f100 rims, but mine are offset modified to suit a narrow track.
They are 8" rims and I've never rolled a 31"tyre off them yet.
I think 7's would be better, too, but 8's seem easier to get, and then you have options to go bigger tyres one day if needed.

christover
ZOOKS RULE DA BUSH
dank
Site Admin
Posts: 712
Joined: Mon 28 Apr, 2008 9:40 pm
Contact:

Re: F100 rim offset

Post by dank »

I used 15x8s with 31" silverstone extremes for a while and never had a problem except I did dint one rim a little on a rock...I could run them at 4-6psi with no problems.
Post Reply