Page 1 of 3
Work on Ben's Zook Day
Posted: Mon 17 Oct, 2016 1:28 pm
by Quinny
Hi All,
Looking at planning a working weekend on my zook at Lukes place, thinking about camping over night with a BBQ/Roast.
Still working out dates, Luke what weekends are you free?
Cheers,
Ben
Re: Work on Ben's Zook Day
Posted: Wed 19 Oct, 2016 10:07 am
by lbzook
I'm keen, depending on date
Re: Work on Ben's Zook Day
Posted: Wed 19 Oct, 2016 10:58 am
by BZOOK
Hi. What's the plan? Need to understand if I can be of any assistance.
Re: Work on Ben's Zook Day
Posted: Wed 19 Oct, 2016 1:18 pm
by Quinny
Taking it back to SPUA, Changing the Diffs to 5.125 Ratio, may pull the auto to see if can find a strange sound it making.
Re: Work on Ben's Zook Day
Posted: Wed 19 Oct, 2016 2:14 pm
by christover1
Quinny wrote:Taking it back to SPUA, Changing the Diffs to 5.125 Ratio, may pull the auto to see if can find a strange sound it making.
Mine made a strange sound after fitting a new skinny starter motor. The flex plate was scraping under some loads. Found out later some shimming is needed with many starters, learn summit every day
Re: Work on Ben's Zook Day
Posted: Wed 19 Oct, 2016 2:16 pm
by Quinny
sounds very simular to my issue chris, i might have a closer look at the starter motor clearance.
Mine makes a awful grinding sound coming off the accelerator at 3k rpm or above
Re: Work on Ben's Zook Day
Posted: Wed 19 Oct, 2016 6:23 pm
by gwagensteve
Quinny wrote:Taking it back to SPUA, Changing the Diffs to 5.125 Ratio, may pull the auto to see if can find a strange sound it making.
Cutting MASSES OF STEEL out of the guards...
Re: Work on Ben's Zook Day
Posted: Thu 20 Oct, 2016 11:03 pm
by porter.8.luke
I will post date just have to confirm with Liz.
Re: Work on Ben's Zook Day
Posted: Fri 21 Oct, 2016 11:16 am
by porter.8.luke
12/13th of November.
Re: Work on Ben's Zook Day
Posted: Fri 21 Oct, 2016 11:17 am
by porter.8.luke
Bills block is confirmed for the 10/11th of December.