Hi,
Would anyone have a jig or drawing dimensions on welding new spring perches on WT diff Housing to suit NT chassis?
Could we chat about RUF conversations at the next shed tech session please?
Diff conversation
Moderator: Committee
-
gwagensteve
- Financial Member
- Posts: 2163
- Joined: Mon 13 Aug, 2007 5:20 pm
Re: Diff conversation
I have a jig but it only works for the rear and only when bolted in to my jig as a full floater, sorry.
Normal procedure is to remove one at a time and keep the angle the same as they’re moved in*. Unfortunately they sort of overlap so you can’t really use one to reference the other. Measure 45 times weld once.
* unless you want to add caster at the front, which I’d recommend.
Normal procedure is to remove one at a time and keep the angle the same as they’re moved in*. Unfortunately they sort of overlap so you can’t really use one to reference the other. Measure 45 times weld once.
* unless you want to add caster at the front, which I’d recommend.
michaelpiranha2000 wrote: The rear is in great condition. but has a broken crown wheel and pinon
Re: Diff conversation
I finished a wt to nt spacing conversion not long ago. I'm a real noob. Steve provided a lot of good advice. Feel free to PM me with any questions you might have. I did build a jig of sorts for the front but my work is unproven at this stage so keep that in mind.
-
Rod_Muddytrail
- Posts: 47
- Joined: Wed 23 Mar, 2016 10:37 am
Re: Diff conversation
G’day B sorry for late reply, well done!
I’ll PM you ASAP
I’ll PM you ASAP