Sierra seat rails

Anything related to 4WDs and 4WDing

Moderator: Committee

Post Reply
User avatar
cj!
Posts: 841
Joined: Thu 09 Aug, 2007 3:54 pm
Location: In a shed building my junk

Sierra seat rails

Post by cj! »

I need to use some drivers side Sierra seat rails to adapt some other seats for 1.0 cab but what I don't know is can I use NT, WT or both models?
Attachments
Sierra Seat Rails.jpg
User avatar
gwagensteve
Financial Member
Posts: 2163
Joined: Mon 13 Aug, 2007 5:20 pm

Re: Sierra seat rails

Post by gwagensteve »

Driver's side are all the same WT/NT/1.0litre. (coilers are different though.. like everything else)
michaelpiranha2000 wrote: The rear is in great condition. but has a broken crown wheel and pinon
User avatar
cj!
Posts: 841
Joined: Thu 09 Aug, 2007 3:54 pm
Location: In a shed building my junk

Re: Sierra seat rails

Post by cj! »

It was indicated to me that the ones in the left hand corner of the pic are NT and the silver ones are WT. From what you are saying I can use both, correct? If so I 'll buy them then.
User avatar
gwagensteve
Financial Member
Posts: 2163
Joined: Mon 13 Aug, 2007 5:20 pm

Re: Sierra seat rails

Post by gwagensteve »

The four in the top left are all passenger side rails. The only drivers side rails in that shot are the silver ones.

Steve.
michaelpiranha2000 wrote: The rear is in great condition. but has a broken crown wheel and pinon
Post Reply