Page 1 of 1
Roll cage tubing.
Posted: Mon 13 Feb, 2023 10:33 am
by porter.8.luke
I'm looking in to doing a order on some tubing this week if anyone needs anything let me know.
Re: Roll cage tubing.
Posted: Mon 13 Feb, 2023 5:41 pm
by luigi
Hi Luke.
Yes. Does it come in 6 meter lengths? 2 lengths for me.
I will pay you on the weekend at the 4wd show?
Regards. Wayne.
Re: Roll cage tubing.
Posted: Mon 13 Feb, 2023 7:16 pm
by Dougie
I am also interested this,
I am not 100% sure what most people’s use on there builts,
but I was thinking 38mm x2.6mm??? for a bit of bar work on my ute,
And if they are 6 mtrs long,
I would like two lengths
One other Question Luke, can I weld this with my MiG welder? Normal mild steel Argon mix? Just double checking
Cheers
Re: Roll cage tubing.
Posted: Mon 13 Feb, 2023 8:08 pm
by porter.8.luke
Yes to welding it with a MIG. 7mt lengths. I will let everyone know what shipping will be. I will cost it per length.
Re: Roll cage tubing.
Posted: Mon 13 Feb, 2023 8:09 pm
by porter.8.luke
Luigi. Would you like 44mm or 38mm? Both have a wall that is 2.6mm thick.
Re: Roll cage tubing.
Posted: Mon 13 Feb, 2023 8:10 pm
by porter.8.luke
Luigi. Would you like 44mm or 38mm? Both have a wall that is 2.6mm thick.
Re: Roll cage tubing.
Posted: Mon 13 Feb, 2023 8:31 pm
by luigi
Hi Luke.
I think 44mm would be good. If that is ok?
Regards. Wayne.
Re: Roll cage tubing.
Posted: Wed 15 Feb, 2023 7:33 am
by porter.8.luke
No problem.