Wheels and tyres
Posted: Thu 15 Jul, 2021 12:03 pm
Hi All,
I am putting new tyres and wheels on my 2013 Grand Vitara. So far i have done a lot of reading and looking. I am decided on a set on 16x7 sunrasias with +20 offset. Tyres will be 225/75/16 BF Goodrich KM3 or KM 2.
Question, centre bore on the sunrasia's is 73.1 vs the 60.1 that the GV requires. Are the hub centric rings ok to use?
Also, any ideas around the offset if this will impact too much. I believe stock offset is +34MM but Would prefer to measure and ensure they will fit both inside guards and not touch callipers.
Note: i am also putting a lift kit in at the same time. likely ironman but open to suggestions.
Appreciate any help.
I am putting new tyres and wheels on my 2013 Grand Vitara. So far i have done a lot of reading and looking. I am decided on a set on 16x7 sunrasias with +20 offset. Tyres will be 225/75/16 BF Goodrich KM3 or KM 2.
Question, centre bore on the sunrasia's is 73.1 vs the 60.1 that the GV requires. Are the hub centric rings ok to use?
Also, any ideas around the offset if this will impact too much. I believe stock offset is +34MM but Would prefer to measure and ensure they will fit both inside guards and not touch callipers.
Note: i am also putting a lift kit in at the same time. likely ironman but open to suggestions.
Appreciate any help.