Suzuki 4WD Club of Victoria

Hi Everyone,

$50 all you can carry pick a part day at Kilsyth and Campbellfield.



Address:

Campbellfield: 1904 Hume Hwy, Campbellfield VIC 3061
Kilsyth: 50 Fussell Rd, Kilsyth VIC 3137

We are looking at splitting up into 2 groups so we can hit both wreakers.

My wish list:

Jimny Doors - so I can make half doors
AW4, tcm and an 8 Bolt flywheel
Jackaroo rear lower links

My Wish List:
Jimny Rear Arms
All the Suzuki Diffs
Rangy rear arms

I'm aiming to go to the kilsyth one.

I'm looking for the following
- 1x 6 spoke xl7 wheel to complete a set.
- a couple of planks from a ute tray to finish my trailer floor. 1830mm wide with 12 ribs to the top surface.
- I wouldn't mind a set of 4.875:1 diffs (1x vitara front, 1x vitara rear)

do you know if there is any xl7 autos l require front and rear diff centres,or disc to disc maybe .Colin

Colin, there is one XL7 auto at Kilsyth (Imlachs in Clayton has two but is not having the $50 special).

There's also an xl7 that's pretty much complete still at jolly rogers in dandenong.

how hard is gonna be to get front diff/centre out at wreckers? back looks easy as ,front looks more complicated.

Both the Kilsyth and Clayton cars have no motors so the front diff will come out easy, three bolts undo the LHS CV and a good tug will see the RHS CV 'pop' out (most of the time).

I've messaged pick a part about engines and rules.