Suzuki 4WD Club of Victoria

I've got about 25m of rope here that I'd like to have an eye in each end of. There's videos on YouTube that show how to splice an eye in but I don't know how much I'd trust doing it myself.

Has anyone done it before or know someone that can?

Jonno


I've spliced loops in both end of my rope

I got a piece of wire (coat hanger) tapped the end of the rope to this thread it through the rope (giving me the desired loop size) and then back through a couple of times and tuck the end in

the end on the left shows you what I did and the one on the right shows you what it looks like after a few uses.

Just followed the above as posted by Mitch. Was super easy except feeding the loose end back in to the centre of the rope was a bit of a challenge.

Thank you!