Suzuki 4WD Club of Victoria

Team. In the absence of a welder to make up new tank mounts at home I have considered getting my mate to take the 40lt tank to his shop and have him build a cage and tank guard around it. I'd then bolt the whole thing to the underside of the rear tub ensuring the load is spread well. It's a small tank so I have also considered mounting it in the tub but am aware that takes away from the little space I have. Pros/cons?
Thanks.
Brenton

Hey Mate,

We've just fitted a LWB Vitara EFI tank (67l) capacity into the stock chassis tank position under a LWB with a 2" BL.

It is literally a perfect fit measurement wise (width between chassis rail and diagonal supports). All mounts needed to be re-fabricated, however considering it only costs $150 for a tank at Piranha that's better/cheaper than a Long range one for $600 +

Thanks,

Chris

Thanks for the reply. Since that post I have decided just to create new mounts off the chassis. I'm actually planning to bush weld just to get everything in place then I can drive it to a mates who can weld it all properly. I'm going with the swb vit tank. Thanks again.