Suzuki 4WD Club of Victoria

what size fuse goes from the battery in the W/Y wire where it says "fusible link" in about thecentre of this awful picture?

No fuse. Stock they had about 65mm of tiny wire that acted as the fuse. As you have fitted the falcon alternator, you now need a 100A fuse between the battery and the alternator charge wire.

Steve.

Cool thanks Steve, I do have a 100A fuse between the alternator and battery but I might put a 100A as per diagram too (because I just bought one anyway)
I think knowing the fuel cut solenoid now I will be able to complete the plugs.

?? That's a bit confusing Jon. There should be one charge wire between the alternator lug and the +ve terminal of the battery. It needs one 100A fuse on it. There shouldn't be anywhere else to put another fuse.

The factory yellow/white lead from the alternator to battery, which contained the fusible link is too small and needs to be replaced with a cable that's equivalent to the Falcon wiring. As the Falcon charge wire goes via a neat little fuse box which contains a 100A fuse, that why I'd use that and eliminate the Suzuki charge wire.

I have an upgraded wire and a 100A fuse between the alternator and the battery positive terminal.
the new fuse is going between the battery positive terminal and the W/Y wire that feeds into the ignition and dissapears into the electrical tape on the loom.