Suzuki 4WD Club of Victoria

who thinks running 31s on a 7" rim with a +4 offset will hit the springs all the time?

I'm running 31's on a 7" rim, I think it's either 0 or +6 (can't remember!) and they do hit on full lock both ways.
I had thought that my steering was substantially compromised, but then after playing around with some spacers on and off an doing a bit of measuring I worked out I'm only missing about 5mm of movement each way.

can you narrow track my zook this weekend leigh? lol
jk

You downsizing to 31's?
I'm quite good at narrowing sills if you want I could do that?

just want a second set for the road.

Ah I see! I wouldn't be too concerned about the offset, chances are you will only loose a tiny bit of lock. I don't even notice mine 99% of the time. If it really did bother you though you could easily extend your steering stops a bit.

I'm running my 31's on -13 15x7 rims and only the very outer part of the side lugs touches the springs. I'd just extend the steering stops a little on a +4 rim, the tyre hitting spring noise I find a bit annoying, especially if it was a daily.