Re: 29-Aug - 1-Sep-2013 - Snow Trip - Any Standard
Posted: Mon 26 Aug, 2013 2:12 pm
I'm not on this trip now, no car and stuff
Suzuki 4WD Club of Victoria
https://vic.suzuki4wd.com/forum/
29-Aug - 1-Sep-2013 - Snow Trip - Any Standard
Page 4 of 5
Re: 29-Aug - 1-Sep-2013 - Snow Trip - Any Standard
Posted: Mon 26 Aug, 2013 6:46 pm
I'm guessing it aint happening this year anyway
Re: 29-Aug - 1-Sep-2013 - Snow Trip - Any Standard
Posted: Mon 26 Aug, 2013 7:55 pm
Yep I think we will consider this one abandoned for this year.
Mike
Mike
Re: 29-Aug - 1-Sep-2013 - Snow Trip - Any Standard
Posted: Mon 26 Aug, 2013 8:16 pm
Re: 29-Aug - 1-Sep-2013 - Snow Trip - Any Standard
Posted: Tue 27 Aug, 2013 10:16 am
Cheer up Matt, aim for beachport instead
Re: 29-Aug - 1-Sep-2013 - Snow Trip - Any Standard
Posted: Tue 27 Aug, 2013 4:23 pm
there won't be much (any?) snow anyway
Re: 29-Aug - 1-Sep-2013 - Snow Trip - Any Standard
Posted: Tue 27 Aug, 2013 6:29 pm
I was thinking the same thing. Last W/E might have been OK, this weekend will be pretty average.
Steve
Steve
Re: 29-Aug - 1-Sep-2013 - Snow Trip - Any Standard
Posted: Tue 27 Aug, 2013 6:45 pm
I did 13 runs from 5pm to 9pm on saturday 
at coronet peak in queenstown where they had an H1 hummer being towed just so it can have its stereo going loud.
was funky though.
at coronet peak in queenstown where they had an H1 hummer being towed just so it can have its stereo going loud.was funky though.
Re: 29-Aug - 1-Sep-2013 - Snow Trip - Any Standard
Posted: Tue 27 Aug, 2013 6:48 pm
Whilst your car is in pieces.
Steve.
Steve.
Re: 29-Aug - 1-Sep-2013 - Snow Trip - Any Standard
Posted: Tue 27 Aug, 2013 6:56 pm
I know 
wednesday, paint tank and have ready for bolt up
friday make bracket for ECM and plug in engine sensors.
saturday re-fit crank angle sensors are taking dremmel to sump holes that are 4mm off to one side
read the service manual plenty of times then fit timing belt back on
buy some fuel line for the return line and then fit petrol tank.
sunday turn key ?
wednesday, paint tank and have ready for bolt up
friday make bracket for ECM and plug in engine sensors.
saturday re-fit crank angle sensors are taking dremmel to sump holes that are 4mm off to one side
read the service manual plenty of times then fit timing belt back on
buy some fuel line for the return line and then fit petrol tank.
sunday turn key ?