29-Aug - 1-Sep-2013 - Snow Trip - Any Standard
Moderator: Committee
-
- Posts: 1238
- Joined: Sun 29 Jan, 2012 8:23 pm
Re: 29-Aug - 1-Sep-2013 - Snow Trip - Any Standard
I'm not on this trip now, no car and stuff
Re: 29-Aug - 1-Sep-2013 - Snow Trip - Any Standard
I'm guessing it aint happening this year anyway
Re: 29-Aug - 1-Sep-2013 - Snow Trip - Any Standard
Yep I think we will consider this one abandoned for this year.
Mike
Mike
2009 Manual Jimny
-
- Posts: 1238
- Joined: Sun 29 Jan, 2012 8:23 pm
Re: 29-Aug - 1-Sep-2013 - Snow Trip - Any Standard
Cheer up Matt, aim for beachport instead
Re: 29-Aug - 1-Sep-2013 - Snow Trip - Any Standard
there won't be much (any?) snow anyway
- gwagensteve
- Financial Member
- Posts: 2163
- Joined: Mon 13 Aug, 2007 5:20 pm
Re: 29-Aug - 1-Sep-2013 - Snow Trip - Any Standard
I was thinking the same thing. Last W/E might have been OK, this weekend will be pretty average.
Steve
Steve
michaelpiranha2000 wrote: The rear is in great condition. but has a broken crown wheel and pinon
-
- Posts: 1238
- Joined: Sun 29 Jan, 2012 8:23 pm
Re: 29-Aug - 1-Sep-2013 - Snow Trip - Any Standard
I did 13 runs from 5pm to 9pm on saturday
at coronet peak in queenstown where they had an H1 hummer being towed just so it can have its stereo going loud.
was funky though.

was funky though.
- gwagensteve
- Financial Member
- Posts: 2163
- Joined: Mon 13 Aug, 2007 5:20 pm
Re: 29-Aug - 1-Sep-2013 - Snow Trip - Any Standard
Whilst your car is in pieces.
Steve.
Steve.
michaelpiranha2000 wrote: The rear is in great condition. but has a broken crown wheel and pinon
-
- Posts: 1238
- Joined: Sun 29 Jan, 2012 8:23 pm
Re: 29-Aug - 1-Sep-2013 - Snow Trip - Any Standard
I know
wednesday, paint tank and have ready for bolt up
friday make bracket for ECM and plug in engine sensors.
saturday re-fit crank angle sensors are taking dremmel to sump holes that are 4mm off to one side
read the service manual plenty of times then fit timing belt back on
buy some fuel line for the return line and then fit petrol tank.
sunday turn key ?

wednesday, paint tank and have ready for bolt up
friday make bracket for ECM and plug in engine sensors.
saturday re-fit crank angle sensors are taking dremmel to sump holes that are 4mm off to one side

read the service manual plenty of times then fit timing belt back on
buy some fuel line for the return line and then fit petrol tank.
sunday turn key ?