I've got about 25m of rope here that I'd like to have an eye in each end of. There's videos on YouTube that show how to splice an eye in but I don't know how much I'd trust doing it myself.
Has anyone done it before or know someone that can?
Splicing Dyneema Rope
Moderator: Committee
Re: Splicing Dyneema Rope
Jonno
I've spliced loops in both end of my rope
I got a piece of wire (coat hanger) tapped the end of the rope to this thread it through the rope (giving me the desired loop size) and then back through a couple of times and tuck the end in
the end on the left shows you what I did and the one on the right shows you what it looks like after a few uses.
I've spliced loops in both end of my rope
I got a piece of wire (coat hanger) tapped the end of the rope to this thread it through the rope (giving me the desired loop size) and then back through a couple of times and tuck the end in
the end on the left shows you what I did and the one on the right shows you what it looks like after a few uses.
pirate4x4 wrote:So much hate, you guys never heard of QUADRANGULATION!? This is thinking outside the box, so outside you can not even see the box anymore
Re: Splicing Dyneema Rope
Just followed the above as posted by Mitch. Was super easy except feeding the loose end back in to the centre of the rope was a bit of a challenge.
Thank you!
Thank you!