Suzuki 4WD Club of Victoria

What was the total time it took to do the whole job ?

This is such a good idea. Who's next? A few decent builds in the works. Surely a group effort could be beneficial.

Steve125 j20 conversion. should only take an afternoon

Crazy Sierra wrote: ↑Mon 19 Nov, 2018 6:50 pm What was the total time it took to do the whole job ?

They had started before I got there at 12:30pm.
He drove home just after dark, so roughly 8pm.
This included a lunch break, snack breaks, lemonade breaks, and a bbq tea break.

Thanks for the reply Chris, lol that’s a pretty good effort pulling an engine and replacing it in just over 8 hours lol

I like the idea of a working bee on the zooks through the club ... sounds like it’s a pretty tight bunch of guys, can’t wait to meet yous all at the next meeting

Hi guys, what are your tips and tricks for getting the main crank pulley bolt undone?

My solutions are never right way to do anything.
But I used to jam something through the inspection hole to lock flywheel.
Then use a bar on the spanner.

I'm sure there is other dodgy ways, too.

Rattle gun may not fit in there?

I'll do a random internet search

i made up a bar that bolted to the pulley holes and it stopped it turning then used a breaker bar on the main crank

ill b home sunday if u need a hand