EGR pipe block off g16b efi in sj50 sierra

[BZOOK]

Hi all. The EGR steel pipe is 5mm from one of the main brake master cylinder lines. I busted the brake line during engine swap. Can I block off inlet and outlet for the EGR pipe? If I can't then will need to route it differently or get creative. Thanks.

[BZOOK]

Hi. Would a pic help? I'm tempted to attach the pipe again and try to massage it out the way.

[lbzook]

Maybe a pic might help, you shouldnt need to delete it to fit the engine in.

[BZOOK]

http://s1160.photobucket.com/user/brent ... brary/g16b

The brake line as it was in the Sierra, hits the pipe. Red tape was a temp stop leak.

[BZOOK]

Hello. In chatting with our good friends at zook parts I now know that I have a late model g16b hence the uncommon issue. I've decided to reattach the pipe for the EGR and 'persuade' it a little to clear the brake line.

[lbzook]

Looks like you should be able to get it far enough out of the way. Just make sure you clearance enough to allow for engine movement too.