Pick a Part $50 Day (2nd of September)

[Quinny]

Hi Everyone,

$50 all you can carry pick a part day at Kilsyth and Campbellfield.



Address:

Campbellfield: 1904 Hume Hwy, Campbellfield VIC 3061
Kilsyth: 50 Fussell Rd, Kilsyth VIC 3137

We are looking at splitting up into 2 groups so we can hit both wreakers.

[neofitou]

My wish list:

Jimny Doors - so I can make half doors
AW4, tcm and an 8 Bolt flywheel
Jackaroo rear lower links

[Quinny]

My Wish List:
Jimny Rear Arms
All the Suzuki Diffs
Rangy rear arms

[jono165]

I'm aiming to go to the kilsyth one.

I'm looking for the following
- 1x 6 spoke xl7 wheel to complete a set.
- a couple of planks from a ute tray to finish my trailer floor. 1830mm wide with 12 ribs to the top surface.
- I wouldn't mind a set of 4.875:1 diffs (1x vitara front, 1x vitara rear)

[colnniko]

do you know if there is any xl7 autos l require front and rear diff centres,or disc to disc maybe .Colin

[steve125]

Colin, there is one XL7 auto at Kilsyth (Imlachs in Clayton has two but is not having the $50 special).

[jono165]

There's also an xl7 that's pretty much complete still at jolly rogers in dandenong.

[colnniko]

how hard is gonna be to get front diff/centre out at wreckers? back looks easy as ,front looks more complicated.

[steve125]

Both the Kilsyth and Clayton cars have no motors so the front diff will come out easy, three bolts undo the LHS CV and a good tug will see the RHS CV 'pop' out (most of the time).

[Quinny]

I've messaged pick a part about engines and rules.