Hi All,
Looking at planning a working weekend on my zook at Lukes place, thinking about camping over night with a BBQ/Roast.
Still working out dates, Luke what weekends are you free?
Cheers,
Ben
Work on Ben's Zook Day
Moderator: Committee
Re: Work on Ben's Zook Day
I'm keen, depending on date
Re: Work on Ben's Zook Day
Hi. What's the plan? Need to understand if I can be of any assistance.
Re: Work on Ben's Zook Day
Taking it back to SPUA, Changing the Diffs to 5.125 Ratio, may pull the auto to see if can find a strange sound it making.
- christover1
- Financial Member
- Posts: 3046
- Joined: Thu 09 Aug, 2007 5:18 pm
- Location: Croydon Victoria Australia
- Contact:
Re: Work on Ben's Zook Day
Mine made a strange sound after fitting a new skinny starter motor. The flex plate was scraping under some loads. Found out later some shimming is needed with many starters, learn summit every dayQuinny wrote:Taking it back to SPUA, Changing the Diffs to 5.125 Ratio, may pull the auto to see if can find a strange sound it making.
ZOOKS RULE DA BUSH
Re: Work on Ben's Zook Day
sounds very simular to my issue chris, i might have a closer look at the starter motor clearance.
Mine makes a awful grinding sound coming off the accelerator at 3k rpm or above
Mine makes a awful grinding sound coming off the accelerator at 3k rpm or above
- gwagensteve
- Financial Member
- Posts: 2163
- Joined: Mon 13 Aug, 2007 5:20 pm
Re: Work on Ben's Zook Day
Cutting MASSES OF STEEL out of the guards...Quinny wrote:Taking it back to SPUA, Changing the Diffs to 5.125 Ratio, may pull the auto to see if can find a strange sound it making.
michaelpiranha2000 wrote: The rear is in great condition. but has a broken crown wheel and pinon
- porter.8.luke
- Posts: 567
- Joined: Tue 04 Mar, 2008 10:14 pm
- porter.8.luke
- Posts: 567
- Joined: Tue 04 Mar, 2008 10:14 pm
- porter.8.luke
- Posts: 567
- Joined: Tue 04 Mar, 2008 10:14 pm