Looking at locker in to xl7 front.

Anything related to 4WDs and 4WDing

Moderator: Committee

Post Reply
User avatar
porter.8.luke
Posts: 564
Joined: Tue 04 Mar, 2008 10:14 pm

Looking at locker in to xl7 front.

Post by porter.8.luke »

Lockright or spartan in to vit front diff single pin. Can it be done or do we need a two pin ( 4 hole center carrier) to have it work properly? I'm thinking we do?
Luke
User avatar
christover1
Financial Member
Posts: 3045
Joined: Thu 09 Aug, 2007 5:18 pm
Location: Croydon Victoria Australia
Contact:

Re: Looking at locker in to xl7 front.

Post by christover1 »

My Spartan front in the Vit was disappointing, although looked good on paper, it was rough and didn't always unlock when you would like. All my Lock right fronts and rears have given years of smooth operation. I ran them in a 2 pinion front in Vit and Sierra. Worked fine, but I suspect a 4 pinion would be stronger. 2 pinion needs the cross pin support block from a 4 pin.
ZOOKS RULE DA BUSH
User avatar
christover1
Financial Member
Posts: 3045
Joined: Thu 09 Aug, 2007 5:18 pm
Location: Croydon Victoria Australia
Contact:

Re: Looking at locker in to xl7 front.

Post by christover1 »

Have heard of people redrilling a 2 pin carrier to take a 4pin, no idea if this is useful or pointless
ZOOKS RULE DA BUSH
Post Reply