Diff conversation

Anything related to 4WDs and 4WDing

Moderator: Committee

Post Reply
Rod_Muddytrail
Posts: 46
Joined: Wed 23 Mar, 2016 10:37 am

Diff conversation

Post by Rod_Muddytrail »

Hi,
Would anyone have a jig or drawing dimensions on welding new spring perches on WT diff Housing to suit NT chassis?

Could we chat about RUF conversations at the next shed tech session please?
User avatar
gwagensteve
Financial Member
Posts: 2162
Joined: Mon 13 Aug, 2007 5:20 pm

Re: Diff conversation

Post by gwagensteve »

I have a jig but it only works for the rear and only when bolted in to my jig as a full floater, sorry.

Normal procedure is to remove one at a time and keep the angle the same as they’re moved in*. Unfortunately they sort of overlap so you can’t really use one to reference the other. Measure 45 times weld once.



* unless you want to add caster at the front, which I’d recommend.
michaelpiranha2000 wrote: The rear is in great condition. but has a broken crown wheel and pinon
Rod_Muddytrail
Posts: 46
Joined: Wed 23 Mar, 2016 10:37 am

Re: Diff conversation

Post by Rod_Muddytrail »

Thanks Steve👍
BZOOK
Posts: 603
Joined: Tue 03 Feb, 2015 6:31 pm
Location: Doreen

Re: Diff conversation

Post by BZOOK »

I finished a wt to nt spacing conversion not long ago. I'm a real noob. Steve provided a lot of good advice. Feel free to PM me with any questions you might have. I did build a jig of sorts for the front but my work is unproven at this stage so keep that in mind.
Rod_Muddytrail
Posts: 46
Joined: Wed 23 Mar, 2016 10:37 am

Re: Diff conversation

Post by Rod_Muddytrail »

G’day B sorry for late reply, well done!
I’ll PM you ASAP
Post Reply