Sierra rear differential assemblies

Anyone can post your questions or comments here.

Moderator: Committee

Post Reply
Bill
Posts: 2
Joined: Tue 21 Apr, 2020 2:16 pm

Sierra rear differential assemblies

Post by Bill » Mon 04 May, 2020 2:20 pm

Hi guys,
I am currently trying to rebuild a Suzuki Sierra wide track hard top 1988 build which is a wide track.
It’s rear differential housing is bent and diff centre and driver’s side axle spline stripped. I am having no luck finding a replacement and was wondering if there are any aftermarket options available which are the same ratio and width? Would mid 90s coil rear end be an option?
Any thoughts/ suggestions appreciated.
PS Some in WA but they are not cheap and post from over there will add to the expense. If I can get them to post it?
Regards
Bill.

User avatar
greyghost
Financial Member
Posts: 292
Joined: Mon 15 Dec, 2008 6:59 pm

Re: Sierra rear differential assemblies

Post by greyghost » Mon 04 May, 2020 3:39 pm

I have a bare WT Rear housing here, no axles though
pirate4x4 wrote:So much hate, you guys never heard of QUADRANGULATION!? This is thinking outside the box, so outside you can not even see the box anymore :)

Bill
Posts: 2
Joined: Tue 21 Apr, 2020 2:16 pm

Re: Sierra rear differential assemblies

Post by Bill » Mon 04 May, 2020 5:46 pm

The WT Housing would be a good start. I know someone who might have diff centre parts and axles so may be able to stick to original spec?
Thanks.

Post Reply