Its easy to put a trimatic behind a G16b so long as you can make the gearing work. The AW-4 has a better ratio spread including a very tall overdrive that offsets deep road gearing, but the trimatic works just fine.
It’s not really feasible to put an AW-4 behind a carby g16. There is a workaround but it’s a bit fiddly.
Wrecker Trip - Saturday April 6
Moderator: Committee
- gwagensteve
- Financial Member
- Posts: 2163
- Joined: Mon 13 Aug, 2007 5:20 pm
Re: Wrecker Trip - Saturday April 6
michaelpiranha2000 wrote: The rear is in great condition. but has a broken crown wheel and pinon
Re: Wrecker Trip - Saturday April 6
Thanks Steve. Very helpful.
Re: Wrecker Trip - Saturday April 6
Darc to attend
Re: Wrecker Trip - Saturday April 6
Hi guys, just a reminded that this trip is coming up this Saturday. The weather is looking like it should be ok.
Don't forget to have a quick look at the stock list and price list online (autowreckers.com.au) and work out what you need/whats available.
Don't forget to have a quick look at the stock list and price list online (autowreckers.com.au) and work out what you need/whats available.
Re: Wrecker Trip - Saturday April 6
I was really looking forward to this. My wife has been in hospital since Monday and I don't see her getting out till next week. That leaves me to look after my 3 kids. Hope to make the next one.
- christover1
- Financial Member
- Posts: 3046
- Joined: Thu 09 Aug, 2007 5:18 pm
- Location: Croydon Victoria Australia
- Contact:
Re: Wrecker Trip - Saturday April 6
Give her my best wishes. And lots of love for you all.
ZOOKS RULE DA BUSH
Re: Wrecker Trip - Saturday April 6
Many thanks.
-
- Posts: 1238
- Joined: Sun 29 Jan, 2012 8:23 pm
Re: Wrecker Trip - Saturday April 6
im out for this day jist had some stuff that i needed to adult come up
Re: Wrecker Trip - Saturday April 6
I'll be late. Didn't get to finish the chop shop cut away on the old car for the guy doing rust repair. His joint is on the way so hopefully 10-10:30 after dropping door sills.