Christmas Weekend at Bill's - 8-9 December

Trip Planning and Trip Reports

Moderator: Committee

User avatar
gwagensteve
Financial Member
Posts: 2162
Joined: Mon 13 Aug, 2007 5:20 pm

Christmas Weekend at Bill's - 8-9 December

Post by gwagensteve »

Hi everyone

It's time for the annual Christmas chill out/break our cars/wish our cars were actually running trip.

Venue is Bill's block, as per usual.

I'll probably be there from Friday evening all going well.

Standard is from no 4WDing through to extreme. It's a great place to learn skills.

There is a drop toilet but BYO everything else.

Details of how to access Bill's are in the club member's area. If you're a new or prospective member, please contact me via PM for details of access.

Cheers,

Steve.
michaelpiranha2000 wrote: The rear is in great condition. but has a broken crown wheel and pinon
User avatar
South001
Posts: 250
Joined: Thu 31 May, 2018 10:42 pm
Location: Melbourne
Contact:

Re: Christmas Weekend at Bill's - 8-9 December

Post by South001 »

I'm definitely in for this one.
Thanks
Chris.
Quinny
Financial Member
Posts: 114
Joined: Thu 10 Mar, 2016 9:02 am

Re: Christmas Weekend at Bill's - 8-9 December

Post by Quinny »

We can finish off the new long drop :)
lockfyne
Financial Member
Posts: 52
Joined: Tue 03 Feb, 2015 5:04 pm
Location: Garfield

Re: Christmas Weekend at Bill's - 8-9 December

Post by lockfyne »

I am very keen
Damo
Posts: 384
Joined: Tue 14 Jun, 2016 7:11 pm

Re: Christmas Weekend at Bill's - 8-9 December

Post by Damo »

Yep I'm in.i spoke with Bill last night re making a door for the dunny and he is good with that.I have to go to Eildon on Monday for work and will drop into Bills on the way home and measure up for the door and probably make it at home beforehand.Bill has plenty of old tin to clad it with so I will bring tools and fixings etc. for the job😃
Damo
Posts: 384
Joined: Tue 14 Jun, 2016 7:11 pm

Re: Christmas Weekend at Bill's - 8-9 December

Post by Damo »

Yep I'm in.i spoke with Bill last night re making a door for the dunny and he is good with that.I have to go to Eildon on Monday for work and will drop into Bills on the way home and measure up for the door and probably make it at home beforehand.Bill has plenty of old tin to clad it with so I will bring tools and fixings etc. for the job😃
User avatar
South001
Posts: 250
Joined: Thu 31 May, 2018 10:42 pm
Location: Melbourne
Contact:

Re: Christmas Weekend at Bill's - 8-9 December

Post by South001 »

Damo wrote: Fri 16 Nov, 2018 7:18 am Yep I'm in.i spoke with Bill last night re making a door for the dunny and he is good with that.I have to go to Eildon on Monday for work and will drop into Bills on the way home and measure up for the door and probably make it at home beforehand.Bill has plenty of old tin to clad it with so I will bring tools and fixings etc. for the job😃
Let me know if you need a hand 👍
Thanks
Chris.
Damo
Posts: 384
Joined: Tue 14 Jun, 2016 7:11 pm

Re: Christmas Weekend at Bill's - 8-9 December

Post by Damo »

Well I got sidetracked and didn't get to Bills to check measure the door so I will just bring some gear and we can knock it up onsite on the day.Will anyone be packing enough amps to run a small power saw?
Quinny
Financial Member
Posts: 114
Joined: Thu 10 Mar, 2016 9:02 am

Re: Christmas Weekend at Bill's - 8-9 December

Post by Quinny »

If neo makes it out he nearly has every cordless power tool known to man ha
User avatar
neofitou
Posts: 683
Joined: Mon 15 Feb, 2010 2:01 pm

Re: Christmas Weekend at Bill's - 8-9 December

Post by neofitou »

and some heavy ply wood that I pulled out of gills car to make the door from yes.

I will also bring the axe head on a pole to dig the hole.

I am working the Saturday, not sure what time I will get there.
Post Reply